LED starLight nano3 (with clutch/switch)

LED starLight nano3 with coupling/switch - latest optical technology:

Battery operating time

• approx. 10 hours at lowest setting
• approx. 4 hours at highest setting

Advantage when changing the battery: the battery can be changed easily and quickly without removing the entire battery unit from the belt or trousers.

Important: Charging the battery

Before first use, the battery must be fully charged without interruption. Connect the charger to the mains - the green lamp indicates operation. Insert the battery into the charger - the lamp lights up orange and the charging process begins. When the battery is fully charged, the charging lamp goes out. The charging process should be carried out on a permanent power source (without night cut-off). There are no restrictions or risks about a maximum charging time of the battery. There are no restrictions or risks about a maximum charging time of the battery at the charger.

Battery reset in case of lighting control problems

Battery reset in case of light control problems due to improper use. Quickly remove the battery . Click the battery back into the LED housing. Then press and hold all three buttons until the upper button briefly lights up red. The LED light control then works properly again.

Patient protection

Protect the patient's eyes from direct light radiation with the protective film supplied.

Service:

starLight nano3 - powerful illumination with 3-fold LED: The compact lamp body contains 3 LEDs: 
Eine white and two coloured.

• White: The white LED guarantees optimal illumination of the treatment area
• Orange: The orange LED is suitable for composite processing, so that the activator does not react prematurely (no faster curing)
• Blue: The blue LED supports you in making composite more visible in combination with fluorescent staining agents, or plaque in use with Plac-O-Tec. Blue supports you in making composite residues visible.
• Green: the green LED is advantageous in surgical applications; contrast enhancement when working under blood
• Colour sequence/colour combination in the same LED head: White/Orange/(Blue or Green)

An additional colour filter is therefore no longer necessary!

Operation is intuitive at the touch of a button, and the luminous intensity of the LED can be continuously adjusted. Like the other members of the starLight family, the Nano 3 can be adapted to all standard magnifying glasses.

The compact and mobile LED lighting system starLight nano3 illuminates your treatment area optimally. Because the right light is crucial for precise vision. The LED starLight nano3 is easy to operate and can be adapted to all commercially available loupe glasses.

• luminous intensity over 90'000 Lux measured at a working distance of 250 mm
  
• Perfectly delimited, homogeneous illuminated field
  
• Noble and light design

 The mobile starLight nano has long since passed its practical test in daily use in many dental practices and operating theatres and has established itself on the market.

Coupling (switch/plug)

The coupling (switch or also called plug) offers the advantage to put away the magnifying glasses without having to remove the battery-powered device with its wiring on the body up to the shoulder. Instead of a coupling, the magnifying glasses can be simply left hanging on the rubber band around the neck when not in use.